5.8GHz 1 Watt Amplifier and Satechi B00B9KOCYA 10 Port USB 3.0 Hub with 3 Control Switches

5.8GHz 1 Watt Amplifier and Satechi B00B9KOCYA 10 Port USB 3.0 Hub with 3 Control Switches

5.8GHz 1 Watt Amplifier

5.8GHz 1 Watt Amplifier

  • Designed for extending the range of 5.8 GHz wireless RF operating devices. Great power booster in co-working with RF-Link’s 5.8 GHz 4-channel, 8-channel module, and some audio/video transmission systems. Built-in switching power regulator. Ideal in boosting power for OEM/ODM design in AV transmission and surveillance industries. Robust and durable housing design. Weather-proof. Perfect for use in an Industrial/Commercial outdoor environment.

    Q: What is the power spec. of APW-1000?
    A: Input: 120V, 60Hz, 18.5W; Output: 12VDC, 1A

    Q: Can I use a 24VAC 1AMP supply with APW-1000, since the unit has a regulator?
    A: The built-in switching power regulator of APW-1000 is a DC regulator, therefore you must adopt the 24VDC 1AMP power supply as the regulator can only take the DC power supply. And the input voltage should be between 12VDC and 28VDC as stated in the installation guide.

    Q: Does the power cable comes with APW-1000 has bare wire at the end? And does it support a screw down terminal block?
    A: Yes, you can use a power supplies with the screw terminal block to connect to the bare wire side of the power cable that comes with the amplifier.

    Q: Will both 12VDC 500mA and 24VDC 1A with screw terminal block work on APW-1000?
    A: Yes, both all work fine, but it is indeed 24VDC with 1 amp shall give you the most benefit of it.

    Q: What kind of patch cable to use on Trango M5830-AP which has reverse polarity SMA connector?
    A: You will need a reverse polarity to Trango system, and normal polarity to APW-1000.

    Q: Are both SMA ports of APW-1000 male and/or female with outside thread?
    A: Both “RF in” and “RF out” connector located on APW-1000 are female connector, therefore, you’ll need male connector with outside thread to connect to amplifier.

    Q: What is the dBm of APW-1000? And how do I increase it?
    A: APW-1000 provides roughly +30dBm. Change to high gain antenna will certainly increase the dBm. For example, if combine APW-1000 with an 18 dBi antenna, you will be able to get a total 48 dBm.

    Q: Which RF-Link product that APW-1000 works with?
    A: APW-1000 works with AVS-5808 to extend transmission range. It also works with RF-Link’s 5.8GHz wireless RF module as part of our OEM offering.

    Q: Does APW-1000 amplify all RF bands: VHF, low and high FM and four CATV bands?
    A: No, it does not.

    Q: Does APW-1000 compatible with HDTV signal?
    A: No. it does not.

    Q: Can I take out the board from APW-1000 and place it in a plastic box instead of the metal box that come with it? And by doing so, will it affect any of its performance?
    A: It is all right to place the APW-1000 board inside a plastic box. However, by doing so, the customer must pay attention to the issue of heat ventilation as APW-1000 will be generating a great deal of heat. And generally speaking, putting APW-1000 board in a plastic box will do very little to affect its performance as long as the antenna is exposed outside the box. Please note, this action may revoke the product warranty.

  • Manufacturer: RF Link
    Manufacturer Product #: APW-1000
    Operating range: 5.0-6.0 GHz
    Supply voltage: 12 VDC
    Supply current: 700 mA
    Match impedance: 50 Ohm
    Transmit gain: 20 dB typical
    Transmit power: 1 W
    Operating temperature: -20 to +75Β° C
    Storage temperature: – 40 to +125Β° C
Price: $139.76

Satechi B00B9KOCYA 10 Port USB 3.0 Hub with 3 Control Switches

Satechi B00B9KOCYA 10 Port USB 3.0 Hub with 3 Control Switches

  • The 10 Port USB 3.0 Hub with 3 Control Switches is a miniature 5-volt, 5-amp power strip that turns one USB port into ten. With ten additional USB ports users can easily charge all of their USB powered devices in one convenient location as well as transfer data at up to 5Gbps. The face of the hub is broken down into three groups of three USB ports and each group’s power draw is controlled by one of the three control switches. Each switch can be turned on/off manually depending upon if any of the corresponding USB ports are being used in the group controlled by the switch. This feature allows for power to be routed directly to the ports being used which will be apparent by the illumination of a blue LED when powered on. The tenth USB 3.0 port is located at the end of the hub. This port is designed specifically for charging tablets, such as an iPad, which are typically unable to charge from a computer’s USB port. The tablet charging USB port also has its own on/off control switch.

    The 10 Port USB Hub is powered by plugging it into an available USB port (cable included) or to a standard AC wall outlet (adaptor included). Plugging the hub into an AC outlet is the best way to guarantee a stable electric current for more effective charging of devices connected to the hub’s ports. The 10 Port USB Hub is a plug and play device that does not require the installation of any software drivers prior to use. The slim design (8.69″ x 1.75″ x 1.06″) saves much-needed space at a workstation and is also ideal for traveling. If connecting external hard drives to the 10 Port USB Hub it is recommended that no more than three be connected at once in order to provide maximum device efficiency. If connecting an external hard drive it is recommended that it be connected to one of the first three ports closest to the power source on the hub.

  • Specifications
    Manufacturer Sariana LLC
    Manufacturer Product No. B00B9KOCYA
    UPC 879961003050
    Packaging Dimensions L 8.75in x W 2in x H 5.75in
    Weight 1 lb
    Product Dimensions L 8.69 inches x W 1.75 inches x H 1.06 inches
    USB Ports 10
    Control Switches 3 (each switch controls 3 ports)
    USB Compliance 3.0
    Transfer Rates Up to 5Gbps
    Power Source USB port or AC outlet
    Manufacturer Warranty 1 year
    • 1x – 10 Port USB 3.0 Hub
    • 1x – AC Power Adaptor
    • 1x – USB Cable
    • 1x – 3M Double Stick Tape
Price: $60.80

Orbit 67101 DripMaster Inline Multi-Stream Dripper/Emitter, Bag of 10

Orbit 67101 DripMaster Inline Multi-Stream Dripper/Emitter, Bag of 10

  • Whether for conservation reasons or to meet the specific needs of varied garden plants, drip irrigation gives you the option to precisely control where your irrigation goes and how much water plants receive. Orbit’s DripMaster system allows you to install a completely custom drip irrigation setup using a variety of components, from different sizes of tubing to drippers with precise flow rates.

    A simple drip system is comprised of a connection to your water supply (either a faucet adapter or sprinkler riser manifold), a length of tubing, and a dispersion system (drippers, sprinklers, etc.). These can be augmented for your unique application with stakes, connectors, and valves. From a single drip line supplying a flowerbed to a setup that covers your entire garden, you can build a system of almost any complexity using the array of components in the DripMaster Line.

    This multi-stream dripper head is an efficient and gentle way to spot water plants and shrubs. The control knob adjusts water flow and spray distance, giving you the precise control you need to save water and make sure your plants get exactly the moisture they need.

Price: $3.45