Heath-Zenith SL-6270 Solid Maple Wireless Door Chime Kit and Audioplex Technology Home Theater Distribution Hub

Heath-Zenith SL-6270 Solid Maple Wireless Door Chime Kit and Audioplex Technology Home Theater Distribution Hub

Heath-Zenith SL-6270 Solid Maple Wireless Door Chime Kit

Heath-Zenith SL-6270 Solid Maple Wireless Door Chime Kit

  • The Heath/Zenith SL-6270 is a complete door chime system, bringing together the best elements of style and convenience. Easy to install and operate, this kit includes an unfinished wood cover so you can paint or stain it to match your decor. The wireless chime features an 8-note Westminster melody or 2-note melody for the front entrance with adjustable volume control to suit varying sound needs. The wireless door chime kit includes a battery operated receiver and one battery operated push button (push button battery included) with up to 150-Feet transmission range between the chime receiver and push button.
  • Product Dimensions:
    • 6″w x 2.375″d x 7.25″h
    • Owner’s Manual
    • Unfinished solid wood cover
    • One push button (with battery)
    • Satin nickel finish tubes
    • Installation hardware kit
Price: $51.17

Audioplex Technology Home Theater Distribution Hub

Audioplex Technology Home Theater Distribution Hub

  • If you need to add a junction box to house jacks, volume controls, switches or receptacles, this single-gang unit makes it easy. Just cut a rectangular hole in the drywall, pop this box in and tighten 2 screws. A clamp flips out behind the drywall as you tighten the screws to clamp the box into position.

    If you need more than one gang, you can use multiple boxes together. Remember that low-voltage and 110/220V devices must be located in separate boxes. Dual-gang junction boxes and triple-gang junction boxes are also available.

  • Specifications

    Manufacturer: Audioplex Technology
    Manufacturer Product No.: S1-18-W 1G
    UPC: 785007207019
    # Gangs: 1
    • Single-Gang In-Wall Junction Box
Price: $1.58

Niles Audio SS-6 Six-Pair Speaker Selector

Niles Audio SS-6 Six-Pair Speaker Selector

  • The Niles Audio SS-6 Six-Pair Speaker Selector allows you to connect multiple pairs of speakers to your stereo receiver or amplifier and play any pair, any combination of pairs, or all pairs simultaneously. You don’t have to worry about overloading your amplifier because the SS-6 has a protection circuit that keeps your amplifier running safely, even if you have all pairs of speakers playing at the same time.

    Features and Benefits
    The SS-6 offers a number of improvements over other speaker selectors:

    • Power handling: 100 watts per channel RMS
    • Protection circuit safeguards receiver/amplifier
    • Separate left and right ground paths for compatibility with all amplifiers, including bridged designs
    • Removable screwless connectors accommodate up to 14 gauge wire
    • Rugged all metal chassis construction
    • Non-skid feet won’t scratch furniture and ensure unit stability during operation
    • 72 adhesive-backed room identification labels
    • Requires an amplifier that is compatible with a 4 ohm load
    • Warranty: Ten-year limited
    • Dimensions: 11-1/2″ wide x 2″ high x 6-3/4″ deep (SS-6)
    • Shipping weight: approximately 5 lbs (SS-6)
  • Audio Power Handling: 100 Watts/channel continuous music power
    Frequency Response: +0 dB, -0 dB (flat) from 20 Hz to 20 kHz
    Mounting: Table-top component
    Wiring Requirements: Individual runs of 2-conductor speaker wire. Removable connectors accommodate wire sizes 14-22 gauge (16 gauge recommended)
    Overall Dimensions: 11-1/2″ wide x 2″ high x 6-3/4″ deep (SS-6)
    Weight: 2-1/4 lbs (SS-6)
Price: $184.95