TechFlex F6N0.38BK Flexo F6 General Purpose 3/8-inch Braided Cable Sleeve, Black – 75 Feet
- The Techflex F6 Semi-Rigid Braided Cable Sleeve is a low cost simple cable management solution that is both attractive and easy to use. The braided, expandable sleeving is an exceptionally durable, highly reliable solution ideal for use in the organization, wrap and protection of a wide assortment of wires and cables in a vast array of applications. It is manufactured with tightly braided polyethylene terepthalate filaments into a robust expandable braided sleeve. Typical applications for this lightweight product is to jacket and protect wire and cable assemblies, wire harnesses, as well as a broad range of other commonly used industrial hoses. It can be effectively used in even the most extreme of environments and is capable of easily withstanding temperatures of up to 257° F!
More about the F6 line of Braided Sleeves from Techflex
F6’s unique split, semi-rigid braided construction makes it the ideal solution for situations where ease of installation is of primary importance. The lateral split allows the tube to open up to accommodate a wide variety of bundling requirements, and the semi-rigid braid configuration simply closes around the entire installation without the need for any additional fasteners (Velcro, tape, etc.). The 10 mil PET braid is lightweight, quiet and flexible. The 25% edge overlap (at nominal diameter) allows coverage around inline plugs, connectors and splices. It will bend to a tight radius without distorting or splitting open and, unlike full rigid tubing, will not impair or affect the flexibility of harnesses. The F6 also allows for the addition or removal of wires without disassembly!
This general use cable is ideal for both DIY home use and for field installers. It’s fray-resistant properties allow frequent expansion at the cut-end without unraveling. Cuts easily and neatly with regular scissors and maintains a fray resistant end during installation. When scissor cut, the end of the F6 wrap it will withstand heavier handling without fraying than standard PT.
Though this braided sleeve can be cut with scissors, using a hot knife gives a more professional look and fuses loose fibers to prevent fraying. See the Techflex Bench Mount Hot Knife or Techflex Hand Held Hot Knife for a truly pro finish on your sleeving installation.
Complete List of Flexo F6 General Purpose Braided Cable Sleeves:
o 2″ – 25 Foot
o 1 1/2″ – 25 Foot
o 1 1/4″ – 6 Foot or 25 Foot
o 1″ – 7 Foot or 50 Foot
o 3/4″ – 8 Foot or 50 Foot
o 1/2″ – 10 Foot or 75 Foot
o 3/8″ – 15 Foot or 75 Foot
o 1/4″ – 20 Foot or 100 Foot
o 1/8″ – 25 Foot or 100 Foot
- 1x – F6 Self Wrap Cable Sleeve
Video Mount Products ER-1 19-Inch Headend Equipment Rack with 40 Rack Spaces, 71-Inches Tall
- If you are looking for a way to organize and maintain your Audio/Video (A/V) equipment, the best solution is to keep all of your A/V equipment in one easy-access location by rack-mounting it. The Video Mount Products ER-1 is a Headend Equipment Rack with 40 Rack Spaces is enough for almost any home application. The rack is capable of accommodating standard 19″ racking equipment and the channels are tapped with 10-32 holes in universal EIA spacing. The ER-1 features a black powder coated finish. Video Mount Products (VMP) developed a system of durable, functional racks, shelves, brackets, mounts and accessories that address the challenges of mounting A/V equipment in small or enclosed areas. VMP’s unmatched designs, famed reliability, and long term durability have become a staple for mounting applications.
Video Mount Products: Mounting Solutions For Video, Audio, and Security… Nothing Holds Up Better!
This Headend-style equipment rack is available in the following sizes:
27 Rack Spaces, 48-Inches Tall
40 Rack Spaces, 71-Inches Tall
46 Rack Spaces, 84-Inches Tall
- Manufacturer: Video Mount Products (VMP)
Manufacturer Product No.: ER-1
Product Dimensions: (L x W x H): 20″ x 20″ x 72.25″
Product Weight: 36.6 lbs
- Installation Guide
- 1x – Left Support
1x – Right Support
1x – Plate
1x – Support Plate
2x – Triangle Plate
32x – Screw #10
20x – Screw 1/4″
16x – Nut 1/4″
32x – Plastic Washer
iPort 70142 LaunchPort Inductive Charging Wall Station – White
- The LaunchPort WallStation provides a home for your iPad on the wall. It securely mounts and charges your iPad using a LaunchPort Sleeve. The WallStation was designed so that anyone can install one in their home. The WallStation uses inductive charging and magnetic mounting, providing effortless mounting and charging, without wires. The LaunchPort WallStation transforms your wall into an information center, gallery, video conferencing center, or whatever else you can imagine.
Note: This charging station is compatible with the iPad 2 and iPad 3rd Generation and requires the AP.3 Sleeve (sold separately) to function properly.
Specifications Manufacturer iPort Manufacturer Product No 70142 UPC 041093701429 Compatible With iPad 2 and iPad 3rd Generation Color White Dimensions 5″ W x 5″ T x 1.5″ D Protrudes from Wall Aproximately 0.25″
- 1x – LaunchPort Inductive Charging Wall Station
- 1x – Wall Plate
- 2x – Wall Anchors
- 1x – Power Supply
- 1x – Owner’s Manual