Tecnomatic 88438 TS-35 DIN 3 Top Hat High Profile DIN Rail, Zinc-Plated, with Slots, 2 Meters and Somfy 1810872 Universal RTS Interface II, 16-Channel

Tecnomatic 88438 TS-35 DIN 3 Top Hat High Profile DIN Rail, Zinc-Plated, with Slots, 2 Meters and Somfy 1810872 Universal RTS Interface II, 16-Channel

Tecnomatic 88438 TS-35 DIN 3 Top Hat High Profile DIN Rail, Zinc-Plated, with Slots, 2 Meters

Tecnomatic 88438 TS-35 DIN 3 Top Hat High Profile DIN Rail, Zinc-Plated, with Slots, 2 Meters

  • Use this steel DIN Rail to mount circuit breakers, terminal blocks, relays and other industrial control equipment on walls, enclosures and equipment racks. It will mount to almost any flat surface and can be cut to a shorter length to accommodate your installation. DIN rails offer a quick snap-on and snap-off railway to attach and remove multiple industrial control devices with ease. The shape of the strip is setup so that devices can be pressed on using DIN clips that attach to the bends in the rail so that the device is held firmly in place. DIN Rails are typically used to mount circuit breakers but can also be used as grounding bars and are also suitable for the installation of contactors, surge protectors, PLCs, module sockets, module electric appliances and is favorable to circuit design of electric appliance and maintenance. It helps to improve installation speed of the devices and lower the manufacturing cost and use-cost.

    This DIN Rail has a Top Hat structure (also referred to as Top Hat section, Type O, or Type Omega), which is 35mm Wide (also referred to as TS-35) x 15mm Tall (also referred to as High Profile), and features 18mm x 25mm slots (18mm long slots x 25mm center to center). Top Hat rails are symmetrical in shape, this is referred to as DIN 3 style. This DIN Rail is fabricated with Zinc-Plated steel for good rigidity and accurate sizing.

    Tecnomatic offers a variety of DIN Rails in different styles:
        •  TS-32 G-Type DIN 1 High Profile DIN Rail, Zinc-Plated:
              •  With 25mm x 36mm mounting slots
              •  With 18mm x 25mm mounting slots
              •  With with no mounting slots
        • TS-35 DIN 3 Top Hat Low Profile DIN Rail, Zinc-Plated:
              •  With 25mm x 36mm mounting slots
              •  With 18mm x 25mm mounting slots
              •  With no mounting slots
        •  TS-35 DIN 3 Top Hat High Profile Hat DIN Rail, Zinc-Plated:
              •  With 25mm x 36mm mounting slots
              •  With 18mm x 25mm mounting slots
              •  With no mounting slots

    Click here for a visual comparison of the different DIN Rails available.

    Note: DIN 3 Top Hat Low Profile Structure is the industry standard (most common).

    Note: The term “DIN derives from the original specifications having been published by Deutsches Institut fur Normung (DIN) in Germany, which have since been adopted as European (EN) and international (ISO) standards.

  • Specifications
    Manufacturer Tecnomatic
    Manufacturer Product No. 88438
    DIN Rail Style TS-35 DIN 3 Top Hat High Profile with 18/25mm slots
    Zinc-Plated Yes
    Length 2 Meters
  • 1x – Tecnomatic 88438 TS-35 DIN 3 Top Hat High Profile DIN Rail, Zinc-Plated Steel, 18/25 Mounting Slots, 2 Meters
Price: $12.00

Somfy 1810872 Universal RTS Interface II, 16-Channel

Somfy 1810872 Universal RTS Interface II, 16-Channel

  • The Somfy 1810872 Universal RTS Interface II can be used to communicate between home automation or other third party systems and Somfy’s RTS Motors and controls. It is capable of individual or group control, and can be operated via infrared remote, RS-232 and RS-485 serial communication. Once an input is activated, an RTS radio command is sent to the automated window treatment. This unit features 16 channels of Radio Technology Somfy (RTS) Control.

    The operation of the Universal RTS Interface is very similar to the Telis 4 Remote Control but there are now 16 channels available for programming. Each Channel can handle one or many RTS motors. You can have the kitchen on one channel, the living room on another, isolate mini groups and control all shades at once. With 16 channels of control the configurations are nearly limitless. All shades or motors assigned to one specific channel will operate simultaneously. The universal RTS interface controls Up, Down, Stop and customer preferred location commands for Somfy RTS motors.

    Please Note: The RS232 to RTS interface can not program the limit points on Somfy RTS motors. You will need a Telis Remote or similar RTS controller to program the shade motors. This interface simply provides the ability to communicate up/down/and stop commands for 16 RTS channels.

    • Serial Interface
    • Supported Protocols RS-232, RS-485
    • # of Ports: 1 RJ45
    • Serial Communication Parameters: 9600 Baud, 8 Data Bits, 1 Stop Bit, No parity
    • RJ45 Pinout
      • Pin 1,2: RS-485
      • Pin 3: Transmit (TX)
      • Pin 4:5: DC+
      • Pin 6: Receive (RX)
      • Pin 7,8: DC- (Ground for RS-232)
    • Pins 1&2, 4&5, 7&8 internally connected
    • Power Requirements
    • Input Power: 9VDC, 200mA – UL Approved
    • Power Consumption: 20mA
    • Mechanical
    • Casing: Poly Case
    • Dimensions” 3.00″ L x 4.00″ W x 1.75″ H
    • Radio Frequency
    • Range: Up to 75 feet
    • FCC Approved
    • Infrared Capability
    • Compatible with Somfy’s 24 channel IR transmitter (Optional IR Sensor Required)
    • Installation Guide
Price: $542.84

Draper 300354 Angled Ceiling Adapter for 807004

Draper 300354 Angled Ceiling Adapter for 807004

  • Use this simple adapter to mount your Orbiter Projector Mount 20×18 on any surface, including angled or cathedral ceilings and even vertical walls.
  • Specifications

    Draper Product No.: 300354
    Compatible With: Orbiter projector mount 20×18 (807004)
    • Angled Ceiling Adapter
Price: $70.51