Woods 1472 Outdoor Floodlight Socket with Photocell and In-LineLinc Dimmer – INSTEON 2475D Remote Control In-Line Dimmer

Woods 1472 Outdoor Floodlight Socket with Photocell and In-LineLinc Dimmer - INSTEON 2475D Remote Control In-Line Dimmer

Woods 1472 Outdoor Floodlight Socket with Photocell

Woods 1472 Outdoor Floodlight Socket with Photocell

  • The Woods 1472 Outdoor Floodlight Socket with Photocell automatically turns the light on at dusk and off at dawn every day. Simply add your outdoor floodlight bulb to the socket, and screw into an outdoor outlet – let the photocell take care of the rest. The Outdoor Floodlight Socket with Photocell saves on energy costs because the floodlight only operates after dark.

    • Ratings: 120V, 300W
    • Owner’s Manual
Price: $6.82

In-LineLinc Dimmer – INSTEON 2475D Remote Control In-Line Dimmer

In-LineLinc Dimmer - INSTEON 2475D Remote Control In-Line Dimmer

  • Specifications

    General
    Brand: Smarthome
    Manufacturer Product No.: 2475D, INSTEON In-LineLinc Dimmer
    UPC: 689076402743
    Patent No.: U.S. Patent No. 7,345,998, International patents pending
    Warranty: 2 years, limited
    Operation
    On-Levels: 32 locally, increments of 1% with software
    Ramp Rates (full-ON to full-OFF): 0.1 to 9 seconds if programmed locally, 0.1 seconds to 8 minutes if programmed remotely
    LED Indicator: Off when load is on and vice versa
    Operation Modes: INSTEON only, X10 only, INSTEON and X10 Combo Mode
    Combo Mode Message Order: INSTEON, INSTEON cleanup, X10
    Multi-Way Circuit Support: Yes, as a receiver only that controls a load
    Setup Memory: Non-volatile EEPROM
    INSTEON Features
    INSTEON Addresses: 1 hard-coded out of 16,777,216 possible
    INSTEON Links: 417
    INSTEON Powerline Frequency: 131.65 KHz
    INSTEON Minimum Transmit Level: 3.2 Vpp into 5 Ohms
    INSTEON Minimum Receive Level: 10 mV
    INSTEON Messages Repeated: Yes
    Ramp Rates (full-ON to full-OFF): 0.125 to 9 seconds if programmed locally, 0.125 seconds to 8 minutes if programmed remotely 
    Mechanical
    Wire Nuts: 4 included
    Mounting: Mounts in single-ganged junction box or light fixture such as a recessed can light.
    Operating Conditions: Indoors, 32 to 104°F, up to 85% relative humidity
    Dimensions: 2.75″ H x 1.75″ W x 0.88″ D (2.75″ H without screw tabs)
    Weight: 3.6 oz
    Electrical
    Supply Voltage: 120 Volts AC +/- 10%, 60 Hertz, single phase
    Power Wire Leads: 6″, 16 AWG, stranded,600V, 105°C insulation, ends stripped and tinned, LINE (black), LOAD (red), NEUTRAL (white)
    Ground Lead: 6″, 18 AWG, stranded, bare copper
    Load Types: Wired-in incandescent lighting devices
    Maximum Amps: 2.5 amps
    Maximum Load: 400 Watts
    Power Consumption: 0.78 Watts
    Certification: Safety tested for use in USA and Canada (ETL)
    X10 Features
    X10 Primary Address: 1 optional (comes unassigned)
    X10 Status Response: Supported
    X10 Resume Dim: Supported (by setting Local On-Level to zero)
    X10 Powerline Frequency: 120 KHz
    X10 Minimum Transmit Level: 3.2 Vpp into 5 Ohms
    X10 Minimum Receive Level: 20mV into 5 Ohms
    X10 Messages Repeated: No

  • 2
  • 3
  • 4
  • 5
  • 12